The FX Impact is a high-performance pre-charged pneumatic (PCP) air rifle renowned for its accuracy, power, and versatility. Designed for both hunting and competitive shooting, the FX Impact has gained a loyal following among airgun enthusiasts worldwide. However, like any mechanical device, it's not immune to occasional issues, and one of the most common complaints users encounter is a jammed cocking lever.
The cocking lever is an integral part of the rifle's action, responsible for both loading and cocking the weapon in preparation for firing. When properly functioning, the cocking lever smoothly cycles through these actions with minimal effort. However, several factors can contribute to the lever becoming jammed, disrupting the rifle's operation and causing frustration for the user.
In this blog, we will let you know the most common reasons why your FX Impact’s cocking lever might’ve jammed and how to fix the issue quickly.
Reasons Why The FX Impact Can Get Jammed
Here are some common reasons why the cocking lever on your FX Impact may become jammed:
- Debris Accumulation: Dust, dirt, or debris can accumulate within the mechanism of the cocking lever over time, impeding its movement and causing it to jam.
- Lack of Lubrication: Insufficient lubrication or the use of improper lubricants can lead to increased friction within the cocking lever mechanism, resulting in stiffness and eventual jamming.
- Misalignment: Misalignment of internal components or damage to the cocking lever itself can prevent it from moving smoothly, leading to jamming during operation.
- Overuse or Wear: Continuous use of the FX Impact without proper maintenance can lead to wear and tear on the cocking lever components, eventually causing it to jam or malfunction.
The Process Of Unjamming The FX Impact Airgun Cocking Lever
Don’t panic if you’ve jammed your FX Impact airgun's cocking lever? We're here to guide you through the process of resolving this issue step by step, ensuring a safe and hassle-free experience.
1. Removing the Barrel
First things first, place your FX Impact airgun on a sturdy table in front of you. Carefully flip the rifle over to access the trigger plate. Using a screwdriver, remove the screws holding the trigger plate in place. It's essential to remove the barrel to prevent any accidental firing in case of a jammed pellet.
2. Removing the Plate
With the trigger plate removed, you'll notice that the hammer spring is compressed. To relieve this pressure, gently move the cocking block back a bit and then cock it back to the bottom position. This action will release the tension on the pin. Next, carefully move the trigger assembly off by manipulating the trigger guard.
3. Removing the Pin
Once the trigger guard is out of the way, it's time to tackle the pins holding the cocking lever in place. Grab a pair of pliers from your toolbox, firmly grip the pins, and pull them out. With the pins removed, you'll find that the lever is no longer held shut, allowing you to easily unjam it.
Conclusion
Dealing with a jammed cocking lever on your FX Impact air rifle can be frustrating, but with the right approach, it can be resolved effectively. By following the steps outlined in this guide, including checking for obstructions, applying lubrication, and gently manipulating the lever, you can safely unjam the mechanism and get back to enjoying your shooting experience.
Remember, with patience and proper maintenance, you can keep your FX Impact in top condition for many shooting sessions to come.
