Hatsan Jet 1 & 2 Adapter (Double Male 1/2-20 UNF)
Your build
Back to suppressorDouble-male adapter — male 1/2-20 UNF on both ends — for the Hatsan Jet 1 and Hatsan Jet 2, which ship with a factory female 1/2-20 UNF muzzle. The double-male provides the male threads on both ends so a standard 1/2-20 UNF airgun suppressor can mount.
Compatible Airguns
- Hatsan Jet 1
- Hatsan Jet 2
Specs
- Both ends: 1/2-20 UNF male
- Material: 6061-T6 aluminum, black hardcoat anodized
- Knurled center band for hand tightening
How it mounts on the Hatsan Jet
The Jet 1 and Jet 2 both hide a female 1/2-20 UNF thread under the shroud's end cap. Take the cap off, thread one end of this adapter in, and the other end gives you a male 1/2-20 UNF thread for the suppressor. It fits both pistols the same way.
The Jet comes in .177, .22 and .25, and the Falcon covers all three (order the bore that matches your caliber in 1/2-20 UNF). For a side-by-side of the two pistols, see Hatsan Jet 1 vs Jet 2.
Pair with any 1/2-20 UNF airgun suppressor.
Not sure if your specific model fits? Email us with the make, model, and a photo of your muzzle — we'll confirm fitment before you order.
Frequently Asked Questions
Match two things: the thread or barrel diameter on your gun, and the thread on your suppressor. Most of our adapters convert to 1/2-20 UNF, the common US airgun suppressor thread, and the product title tells you the input and output. If you don't know your muzzle thread, the airgun thread size guide shows how to check it. You can also email support@airguncapital.com with your make and model and we'll confirm fit before you order.
A straight, fully seated adapter never touches the pellet. Trouble comes from an adapter that's loose against the muzzle shoulder or a suppressor bore that sits off axis. Snug it down and re-zero after you install it, because any muzzle device can move point of impact a little the first time.
Threaded adapters screw onto the factory muzzle thread. Start them by hand so they don't cross-thread, then snug about a quarter turn. Slip-on and clamp-style adapters slide over the barrel or shroud and lock with set screws, so tighten those evenly. Then thread your suppressor onto the adapter and re-zero.
No tax stamp or Form 4 is needed to buy an airgun thread adapter from us, and it ships to your door. State and local rules on airgun suppressors and accessories vary, so check that it's legal where you live before you order.